反推力装置运动学与动力学仿真

为了研究叶栅式反推力装置各部件在工作过程中的运动学与动力学特性,根据机构运动原理对反推力装置进行简化并建立了运动学与动力学数学模型。以滑动整流罩位移与阻流门所受气动负荷为输入进行运动学与动力学仿真,得到了反推力装置各部件的位移、速度及受力特性曲线,并对比分析了在不同尺寸参数下各部件特征点的运动轨迹和反推力装置负载力变化。结果表明:运动学及动力学仿真结果与工程实际相符；反推力装置机构参数选择不合理时,各设计点会发生干涉现象并导致机构无法运动;机构参数变化对负载力最大值影响尤为突出,在阻流门AC段长度值增大6%,阻流门CB段长度值减小9%的情况下,负载力正向最大值将增大19.53%,负向最大值增大12.67%。研究方法及研究结果可为反推力装置运动学及动力学分析,以及为反推力装置机构优化设计提供参考。      

基于变马赫数的五孔探针三维插值方法

探讨了五孔探针气动数据的插值方法,为提高插值精度,开发了基于传统线性插值法的三维线性插值法。该方法把同一探针在不同马赫数下的校准图形成三维数据库,将实验数据通过三维图进行插值。并使用改进前后的两种插值方法分别对校准风洞测得的数据进行整理,对比结果证明:在实验工况连续变化的情况下,三维线性插值法在插值精度上要优于传统线性插值法。特别是在来流马赫数变化较大时,该方法可以改善单一校准文件处理造成的数据精度问题,可用于自动化流场采集系统,为流场高速高精度采集奠定基础。     

基于CFD技术的鼻腔输药的流动特性研究

鼻腔输药作为一种新颖的输药方式,具有方便可靠的特点,不仅可以适用于局部而且适用于全身用药,已经受到广泛的重视。但由于人类的呼吸道复杂的立体结构使得鼻腔输药成为生物医药研究的一个长期的挑战。利用CFD(计算流体动力学,Computational Fluid Dynamics)技术对鼻腔输药的流动特性进行研究,对一个基于真实的人类鼻腔解剖的3D模型的输药的流动过程进行了分析,着重研究了不同的药物颗粒的流动和沉淀特性。利用CFD的商用软件FLUENT在层流情况下对不同的密度、直径和流动速率的药物颗粒在鼻腔中流动进行了数值模拟,并对计算结果进行了比较分析。CFD研究的结果为鼻腔输药这种新颖的药物输送方式的优化设计提供了依据。     

Application of multi-objective optimization to axial compressor preliminary design

The axial compressor is one of the most challenging components for aero engine design. The highly complex and multi-disciplinary design process is built up from several separate design phases differing with respect to the number of details. Typically, meanline prediction is the first step of the aerodynamic design process where the goal is to provide a first guess and proper choice of basic design parameters. As a preliminary design procedure it is one of the most important parts of the compressor design process since a poor design decision on these parameters cannot be corrected by subsequent development efforts. The design of a compressor is always a compromise between contradicting requirements like high efficiency, low number of stages and high surge margin. This is typical for multi-criterion optimization problems requiring a high number of design analyses and a well-designed procedure for finding trade-off solutions. The paper will show how to automate a given Rolls-Royce preliminary design process in order to find Pareto-optimal trade-off solutions for design conditions. The aspect of process acceleration is also an important goal to release the design engineer from time-consuming parameter studies. Essential elements for speeding up the design process are the use of modern process integration tools, multi-criterion decision concepts, and nonlinear programming algorithms. Results will be shown based on a given Rolls-Royce compressor design for multi-objective optimization with respect to maximum efficiency, maximum surge margin, and maximum overall pressure ratio, where different deterministic and stochastic algorithms are used.     

Effect of protrusion amount on gas ingestion of radial rim seal

In this paper, the effect of different amount of protrusion on various parameters in rotor–stator system was experimentally studied by measuring CO₂ concentration and pressure, in order to obtain the optimal protrusion amount. The parameters of different dimensionless sealing flow were measured under the condition that the annulus Reynolds number was 4.39 × 10⁵ and the rotating Reynolds number was 1.05 × 10⁶. The results show that the change of the amount of protrusions has little effect on the static pressure in the cavity, and the static pressure change near the sealing ring is almost negligible. But the total pressure and sealing efficiency increase first and then decrease with the increase of the amount of protrusion. The variation of power consumption is the same. A complex vortex structure will appear at the high radius region when the protrusion is installed. On the other hand, the protrusion can effectively reduce the minimum sealing flow of the rotor–stator cavity. Furthermore, considering the sealing efficiency and power consumption, the best range of the protrusion amount is about 36. The ratio near this range can optimally balance the alleviation of the gas ingestion and the reduction of the power consumption.     

航空发动机中冰晶结冰的研究进展

一般认为经过风扇压缩后空气温度高于冰点，压气机内不会发生结冰。然而近年来，国外研究者对若干起发动机推力损失故障的研究表明冰晶能够引起压气机内部结冰，并在试验室中再现了温度高于冰点时压气机内结冰这一现象。我国在航空发动机冰晶结冰研究方面刚刚起步，为准确掌握国内外研究现状，从数值和试验两方面对国内外已开展的压气机内结冰研究进行了分析与总结，讨论了当前冰晶结冰的主要研究成果和存在的局限，提出了开展冰晶结冰研究需重点关注的方向，为我国航空发动机冰晶摄入结冰研究和适航审定研究提供一定参考。     

Sound insulation performance of plates with interconnected distributed piezoelectric patches

This paper deals with the sound insulation performance of a thin plate with intercon-nected distributed piezoelectric patches. Piezoelectric patches are periodically bonded on the sur-faces of the plate in a collocated fashion, and are interconnected via an inductive circuit network. This piezoelectric system is termed as piezo-electromechanical (PEM) plate in the paper. Homogenization methods are involved under a sub-wavelength assumption to analytically develop the dynamical equations for the PEM plate. The dispersion relationships and energy densities of the wave modes propagating in the PEM plate are studied;the sub-wavelength assumption is verified for the simulations in this paper. The coincidence frequency of the PEM plate is researched, and results show that the coincidence frequency of the PEM plate will disappear at certain circum-stances;mathematical and physical explanations are made for this phenomenon. The disappearance of the coincidence frequency is used to optimize the value of inductance, for the purpose of improv-ing the sound transmission loss of the PEM plate.     

Model reference adaptive control with smooth switching scheme for piecewise linear systems and its application in turbofan engine control

A model reference adaptive control (MRAC) with smooth switching scheme was proposed for piecewise linear systems, and the method was utilized in turbofan engine control to avoid the discontinuity of control input. In this scheme, each sub-region of the operating envelope had its own MRAC controller, and smooth indicator function based smooth switching scheme was introduced to switch multiple controllers smoothly at the boundary of adjacent sub-regions. The Lyapunov stability analysis indicated that the proposed smooth switching scheme can guarantee the convergence of the closed-loop system during the controllers switching. The tracking error system was converted into a switched system to analyze the global stability of the closed-loop system. The advantage of the method was that the chattering of system output and instability caused by asynchronous switching can be eliminated. The simulation illustrates the effectiveness of the proposed control scheme in comparison with the existing MRAC controller with gain scheduling for turbofan engine.      

基于自适应容积粒子滤波的车辆状态估计

针对车辆状态估计中由模型的强非线性、噪声的非高斯分布等相关因素导致估计精度下降甚至发散的问题,本文提出了基于自适应容积粒子滤波(Adaptive cubature particle filter,ACPF)的车辆状态估计器。首先基于非稳态动态轮胎模型,构建高维度非线性八自由度车辆模型。其次利用自适应容积卡尔曼滤波(Adaptive cubature Kalman filter,ACKF)算法更新基本粒子滤波(Particle filter,PF)算法的重要性密度函数,以完成自适应容积粒子滤波算法设计。利用车载传感器信息,运用ACPF算法实现对车辆的侧倾角、质心侧偏角等关键状态变量高精度在线观测。搭建Simulink-Carsim联合仿真平台进行了算法的验证,结果表明该算法状态估计精度高于传统无迹粒子滤波(Unscented particle filter,UPF)算法,且算法运算效率高于UPF算法,而传统PF估计值发散。研究结果为实现车辆动力学精准控制提供了理论支持。     

热力学排气系统中节流效应及其冷量利用分析

为更好地理解热力学排气系统(TVS)的运行机理，优化其运行参数，针对节流装置，建立了热力学模型，讨论了节流过程中状态参数的变化规律，对比了单相气体、单相液体节流的性能特性，进一步揭示了焦汤节流效应的原理，分析了不同节流背压下节流前低温工质(液氢和液氧)压力和温度对节流性能的影响，并结合TVS实际应用，阐述了节流最大制冷量的利用效果，提出了优化的TVS工作区间。研究表明：在节流过程不发生相变情况下单相气体节流制冷效应要比单相液体节流制冷效应更加显著；而在节流过程发生相变情况下液体节流至两相后，由于空化吸热导致流体温度降低，对于液氢，0.5MPa的压降可产生接近3 K的温降。对于液体节流，节流前压力对节流过程影响可忽略，〖JP2〗而节流前温度和节流背压对节流过程起主导作用；对于液氢在在轨运行工况下，考虑到节流制冷量的充分利用，同时保证换热过程体积含气率不高于90%，推荐TVS系统中节流背压范围为75～143 kPa。